Installing the HP LaserJet P2015 printer on Windows 10 using a USB connection can sometimes be tricky, especially since this is an older printer model. However, with the right steps, you can get it up and running smoothly without much hassle. This guide will walk you through the complete process in a simple and clear way.
Step 1: Connect Your Printer
Start by connecting your HP LaserJet P2015 printer to your computer using a USB cable. Make sure the printer is powered on. Windows may attempt to automatically detect and install the driver. If it does, you might see a notification saying the device is ready to use.
However, in many cases, Windows 10 may not find the correct driver automatically, so you will need to install it manually.
Step 2: Open Device Manager
To begin manual installation:
- Press Windows + X
- Click on Device Manager
- Look for your printer under:
- “Other devices” or
- “Unknown devices” or
- “Printers”
You may see something like “HP LaserJet P2015” with a yellow warning icon, indicating that the driver is missing.
Step 3: Update Driver Manually
- Right-click on the printer name
- Click Update driver
- Select Browse my computer for drivers
- Then click Let me pick from a list of available drivers on my computer
This will allow you to manually choose the correct driver.
Step 4: Choose the Correct Printer Driver
In the next window:
- Select Printers
- Click Next
- From the list of manufacturers, choose HP
Now scroll through the list of models and look for:
HP LaserJet P2015 Series
If you don’t see it, don’t worry—you can install it using Windows Update.
Step 5: Use Windows Update (If Driver Not Listed)
If the driver is missing:
- Click the Windows Update button in the driver selection window
- Wait for a few minutes while Windows loads additional drivers
- Once updated, search again for HP LaserJet P2015 Series
Select it and click Next
Step 6: Complete Installation
- Follow the on-screen instructions
- Assign a printer name (or keep the default)
- Choose whether to set it as default printer
- Finish the setup
Once done, Windows will install the driver and configure the printer.
Step 7: Print a Test Page
To ensure everything is working properly:
- Go to Control Panel → Devices and Printers
- Right-click on your printer
- Select Printer Properties
- Click Print Test Page
If the page prints successfully, your printer is ready to use.
Troubleshooting Tips
If your printer is still not working, try the following:
1. Change USB Port
Sometimes the issue is with the USB port:
- Try connecting the printer to a different USB port
- Reinstall the driver if necessary
2. Restart Print Spooler
- Press Windows + R
- Type msc
- Find Print Spooler
- Restart the service
3. Use Universal HP Driver
If the specific driver doesn’t work, you can install the HP Universal Print Driver (UPD):
- Works with many older HP printers
- Available on HP’s official website
Alternative Driver Option
If you are working with multiple HP printer models, you may also find it helpful to install drivers like the HP LaserJet M1136 MFP Driver, which can sometimes share compatibility components and simplify setup in mixed printer environments.
Important Notes
- Always use a direct USB connection during installation
- Avoid connecting through hubs initially
- Make sure Windows is updated for better driver support
- Older printers may not have dedicated Windows 10 drivers, so compatibility drivers are used
Installing the HP LaserJet P2015 driver on Windows 10 via USB is straightforward once you follow the correct steps. Even though it’s an older printer, Windows still supports it through built-in or updated drivers. By using Device Manager and Windows Update, you can easily get your printer working without needing external software.
With proper installation and a quick test print, your HP LaserJet P2015 will be ready for daily use in no time.
