If your Lloyd inverter AC has suddenly stopped cooling, keeps showing an error, or the outdoor unit is not starting, there is a chance that the outdoor PCB could be the problem. The PCB, or Printed Circuit Board, is one of the most important electronic components inside an inverter AC because it controls several functions of the outdoor unit.
Naturally, one of the first questions that comes to mind is: how much will a replacement PCB cost?
The actual Lloyd inverter AC outdoor PCB price can vary depending on the AC model, PCB part number, board version, availability, and whether you choose a new, tested replacement or a repaired board.
Let’s break it down in simple terms.
What Does the Outdoor PCB Do?
The outdoor PCB acts like the control centre of the AC’s outdoor unit. In an inverter AC, the electronics have to continuously manage the compressor, fan motor, sensors, communication between indoor and outdoor units, and various safety functions.
When the PCB is working correctly, these components can communicate and operate according to the cooling requirement.
However, if the board develops a fault, the AC may behave strangely. You may notice that the compressor does not start, the outdoor fan does not run, the AC switches off unexpectedly, or an error code appears.
That does not necessarily mean the PCB itself is completely damaged. Sometimes only a particular electronic component or circuit on the board may have failed.
How Much Does a Lloyd Inverter AC Outdoor PCB Cost?
There isn’t one fixed price for every Lloyd inverter AC because different models use different PCB boards.
Current online listings show a wide range of prices. For example, a specific Lloyd 1.5-ton inverter outdoor PCB, model MITE50HV-3S-19, is listed at ₹4,500 by Elite Air Innovations. The listed original price is ₹6,500.
Other marketplace listings show Lloyd outdoor inverter PCB units around ₹3,500, while some listings are around ₹5,500–₹6,500.
So, as a practical reference, you may come across replacement boards in the ₹3,500 to ₹7,000+ range, depending on the exact model and board specification. This is only a general market range, not a fixed price for every Lloyd AC.
Remember that technician charges, diagnosis, shipping, and installation may be additional.
Why Does the Price Vary So Much?
If you find two PCBs that look similar but have very different prices, don’t assume the cheaper one will automatically work with your AC.
Several factors can affect the cost.
1. AC Model and Capacity
A PCB designed for a 1-ton AC may not be suitable for a 1.5-ton or 2-ton model. Inverter systems can use different control boards depending on the compressor and electrical design.
2. PCB Part Number
The part number is one of the most important details when buying a replacement. Even boards from the same brand can have different codes.
For example, the MITE50HV-3S-19 board listed for a Lloyd 1.5-ton inverter split AC has specific technical codes and compatibility information.
3. Original vs Replacement Board
An original or manufacturer-compatible board can cost more than a repaired or generic replacement. However, compatibility should always be checked before making a purchase.
4. Availability
Some older AC models may have limited spare-part availability. If a board is difficult to find, its price can be higher than a commonly available model.
5. Repair vs Replacement
A PCB doesn’t always need to be replaced completely. If the damage is limited to a capacitor, resistor, relay, connector, or another repairable component, a qualified technician may be able to repair the board.
Should You Repair or Replace the PCB?
This is one of the most common questions AC owners have.
If the PCB has minor component damage and the rest of the board is in good condition, repair may be worth considering. Repair can be less expensive than buying a complete replacement.
On the other hand, replacement can make more sense when the board has extensive burning, damaged tracks, repeated failures, severe electrical damage, or problems with major control components.
Current service-market estimates put inverter outdoor PCB repair in the several-thousand-rupee range, with the final amount depending on the type and extent of damage.
A technician should diagnose the board before you decide.
Signs That Your Outdoor PCB May Have a Problem
A faulty PCB can produce symptoms that look similar to other AC problems. Some common warning signs include:
-
The outdoor unit does not start.
-
The compressor fails to operate.
-
The outdoor fan is not running.
-
The AC repeatedly switches off.
-
An error code appears.
-
Communication between the indoor and outdoor units fails.
-
The AC does not respond normally after receiving a cooling command.
-
There are visible burn marks or damaged components on the PCB.
However, these symptoms do not automatically prove that the PCB is faulty.
For example, power-supply problems, wiring issues, sensor faults, compressor problems, or communication errors can sometimes produce similar symptoms. Proper diagnosis is therefore important.
How to Find the Correct PCB for Your AC
Before ordering a replacement board, don’t rely only on the AC brand name.
Check the following details:
AC model number: Look at the rating label on the indoor or outdoor unit.
Capacity: Confirm whether your AC is 1 ton, 1.5 ton, 2 ton, etc.
PCB part number: Check the number printed directly on the existing board.
Board version or revision: Some boards have different revisions, so this information can matter.
Outdoor unit details: The outdoor unit model can help confirm compatibility.
It is also a good idea to compare the connectors, component layout, and board codes with the replacement before installation.
The product information for a Lloyd replacement board specifically recommends matching the part number and board code with the old PCB and confirming compatibility before purchase.
Don’t Forget Installation Charges
The price of the PCB is not always the final repair bill.
A technician may charge separately for diagnosis, removal of the old board, installation of the replacement, testing, and travel.
This means a board advertised at a particular price can result in a higher total repair cost once installation and other services are included.
Before approving the repair, ask the technician for the complete cost, including the PCB, labour, and any additional parts.
How to Protect Your AC PCB
Prevention can help reduce the risk of electronic failures.
Make sure the AC has a stable electrical supply and proper earthing. Voltage fluctuations and electrical surges can damage sensitive electronic components.
Regular AC servicing is also useful. Keep the outdoor unit reasonably clean and make sure there is enough airflow around it. Excessive heat, moisture, dust, and electrical problems can put additional stress on electronic components.
If your area experiences frequent voltage fluctuations, discuss suitable electrical protection with a qualified electrician.
Final Thoughts
The cost of an outdoor PCB for a Lloyd inverter AC depends heavily on the exact model, PCB code, board version, condition, and source. In the current market, listings can range from roughly ₹3,500 to ₹7,000 or more, while a specific 1.5-ton Lloyd replacement board is currently listed at ₹4,500 by one supplier.
The most important thing is not simply finding the cheapest board. The replacement needs to be compatible with your AC’s outdoor unit.
Before purchasing, check the model number, PCB code, revision, and connector configuration. If you’re unsure whether the problem is actually the PCB, have the outdoor unit properly diagnosed first. A correct diagnosis can save you from spending money on a board that your AC doesn’t actually need.
With the right PCB and professional installation, your Lloyd inverter AC can get back to normal operation without the unnecessary expense of replacing the entire air conditioner.
